Temam Tadbir

eTVOC + eCO2 measurements, good choice for home and office applications, room type, 2 analog outputs, modbus/rs485, display, 2x relays, buzzer 20mm round type replaceable electrochemical cell, from 50ppm to 1.000ppm room type, 2 analog outputs, modbus/rs485, display, 2x relays, buzzer ,duct type, mems type mox sensor, easy field calibration, low-medium-high sensitivity 2 analog outputs, modbus/rs485, display, 2x relays, buzzer 20mm round type replaceable electrochemical cell, 5-10-20-30ppm ranges, wall type, 2 analog outputs, modbus/rs485, display, 2x relays, buzzer eTVOC + eCO2 measurements, good choice for home and office applications, wall type, 2 analog outputs, modbus/rs485, display, 2x relays, buzzer wall type, mems type mox sensor, easy field calibration, low-medium-high sensitivity, 2 analog outputs, modbus/rs485, display, 2x relays, buzzer The EZ Gateway is an easy to use, high-performance building and industrial automation protocol gateway for integrators to interface M-Bus, Modbus or KNX products in commercial buildings, campuses and industrial facilities This is a concept for total environmental sensing in a single space or plant housing. Each sensor measures a predefined selection of variables. All option outputs are available via BACnet MS/TP or ModBus RT. The databus type is user-selectable. If your application has specific requirements, this sensor can be tailored with a wide range of options. Sontay revised range of thermostats are well suited for a number of applications of temperature control or safety cut-out in pipe work systems, calorifiers, duct work systems, green houses and many other installations. They all have the set-point adjustment under the cover to prevent unauthorised tampering. They are available in two types; 1.) Control thermostats (auto reset) - with an adjustable set point, adjustable differential and auto rest, which provides a switched output to a heater or controller. 2.) Safety thermostats (manual reset) - with an adjustabl